Detailed Product Description

Hydraulic Ironwork (Compact 40):

I. 55 up to 160 ton machines are in the  tradition of well engineered, robust steelworkers, built for a long working life. These universal machines are supplied with standard tooling including repetition support tables at punch, shear and notch stations and with easily adjusted hold downs at all five work stations to safety control the operations. Comprehensive safety guards are fitted as standard on all work stations. Free standing on a suitable floor, they just require electrical connection to be ready for work. For two operator utilization, the hydraulic system is activated by two shielded foot controls, one operating the punch end cylinder, the other operating the shear end cylinder. The shear cylinder provides the power to the three shearing and the notch stations. 

The system gives accurate power inching at all five work stations and allows the machines to be stopped at any position giving safe and accurate tool setting and work positioning. Limit switches at both ends of the machine control stroke length at all stations. Centralized lubrication is metered by one-shot system, being only one feature of the low maintenance requirement. The machine comes equipped with a 'Touch & Cut' ruled length stop as standard.

II. Feature:

   large punch table with multi-purpose bloster - removable table block for overhang channel / joist flange punching

• punch table, shear table and notch table standard equipment
• non-tiltable and as thus wear-free angle-cutting blades
• power inching and adjustable strokes at punch & shear end
• centralised pressure lubrication
• wide variety of applciations - for large hole punching, tube notching, bending...
• large throat depth at the punching station - extra deep throat models available
• low voltage movable halogen spotlight standard equipment
• mitre cut flanges of angle under shear blade
• alternative rectangular / vee notching facility
• work station guards standard fitment
• two cylinder operation
• overload relief on hydraulic system
• interchangeable bearings ,seals and valves readily available from stockists of hydraulic equipment
• machines with very low maintenance requirements

III. Standard equipement:

punch adaptors

• swing away punch stripper unit
• easy change punch holder
• universal die bloster
• heavy-duty support tables with guides at shear station and notch station
• heavy-duty punch table with guides and backstop
• curved shear arm blade with 2 (optional: 4) cutting edges
• shears body blade with 4 cutting edges

• section arm & body blade with 1 cutting edge

• angle cutting arm & body blades with 4 cutting edges

• rectangular notch bolster blades with 4 cutting edges

• service tookit

• work station guards

• low voltage halogen spotlight on magnetic base

• instruction, operating and maintenance manual

• hydraulic oil fill

• one metre 'Touch & Cut' ruled length stop